i need a 12,24, common rail engine
i am in need of a 91.5-93 ve or 94-98.5 12v 215 pump engine or 24valve or common rail with full harness and all non 53 block to build into a race motor. really all i need is a good block, head, valves, and pump because i am building it into a stroker motor. i would prefer the 12v engines since its probably what i can afford (cant spend over a 1,000). i live in cali/ oakdale/ area code 95361. will drive up to locations three hours away depending on the deal. PM me or email me.
Bradley Carter |
i've got a cr without a harness and a gouged number 6 wall. and no injectors lol
|
degde
it all sounds good till i read, large gouge in the wall. i am not experienced with cr engines but from what i know no blocks are sleeved from cummins?
|
no you would have to bore it out and put a sleeve/liner in it.
|
I have a 24v engine without injectors and pump and turbo from a 02 I I'm pulling the head this weekend to see the condition of the internals
|
i have a complete 24v with a bad bottom end... complete with injectors even have a harness
|
All times are GMT -5. The time now is 03:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands