Studs and sticks
 

Between now and July I wanna do some modding, studs and injectors gonna be next. I eventually wanna put a FASS on there too, but for now I'm looking for something I can run w/o a programmer (too many bad experiences with them, won't do it) or a FASS. 60's or 90's, and whatever studs that would hold up to 500hp. I'm building a fast daily driver, not an all out race truck. I have a paypal acct. but I have to clear up a small debt from my engine rebuild first. Just seeing what's out there and possibly gonna be out there in a few months. Cheers.

what was ur bad experience with a programmer if ya dont mind me asking?

imo, id go with an airdog for the lift pump.

good luck with it :tu:

2 yrs. ago I ran a bully dog, no gauges, tranny & tc, this year still no gauges smarty, towing with the timing cranked broke # 6 ring and trashed 4 injectors, really it's my own damn fault but still, I wanna stay away from programmers for a while, maybe forever if I can pull it off.... but ya, Airdog or FASS and maybe an Arson upgrade if I decide to go with 90's.

You won't make 500hp without tuning. Gauges are the FIRST upgrade, not the last . . . . .

When you get ready, let me know.
Lift pump is a very good idea and we only sell and install FASS. Kinda tells ya something. . . .

injectors with proper tuning are going to need a little more air than your stock HE351 can provide.