Took The 89 To The Test And Tune **Video Inside**
 

Didn't do too bad for a Stockish truck...

about 265 feet....


Yep... She's bad....


lol

Awsome...... Can't wait for my first sled pull :up:

Sweet Bobby !!!!

have you turned the pump up any??? cut and rotate the fuel pin, and screw them screws in, and get rid of that muffler.....oh and 3200 spring.......oh and your done, you will never get rid of the sickness.......

Smoke screw in... Fuel pin rotated... Full power screw is stock... 3200 spring sitting on the table... need an exhaust. lol

DID YOU THROW THAT TOP SPEED SCREW AWAY YET???, they are useless, put that 3200 spring in, turn that screw in til it wont idle any lower and let'er eat:choochoo::choochoo:.......what gear (tranny and t-case) and rpm are you running???

that spring takes about 45 minutes the first time, after that, about 15 minutes......

Lookin good man. I cant wait to move up there. I need to work on somthing besides my own truck lol

She ran 1-2-1 in 4lo

Have not turned on th etruck yet really. Have had alot goig on. I didn;t really plan on pulling today, my buddies gave me a bunch of crap till I finnaly went up there and pulled.

it only takes about 15 minutes to tune it.....

Don;t have a gauge yet... Also didn't have any tools. I liked getting a "base line" run in also.

Did find out the truck only weighs in at 5500 lbs. That's alot of weight I could hang... :w2:

5500# is about right, my truck weighs a little over 5K without me in it, hang 2000 on the nose and the rest in the cab with ya.......should get a little bit further.....

What the hell did you record that with? A tape reel? :ha:

Nice first effort though, Bobby. Good job, bud. :up2:

Way to go Bobby! :U: :U: :c:

got any pulls coming up????

April 12th in Lively VA kicks off our season.

time for some NOS...... :w2:

Send your bottle.... :w2:

Any guesses on how many pulls the stock 727 will take?

you pay the hazmat and a full cyl will be headed yer way...... you'd be better off buying it in 50# cyl. from you're local welding store, fab up some big ole brackets to mount it in the bed. i was payin about 2 bux a pound from it back when i was getting them big old cyl's.

depends on if i'm drivin it or not...... i'd say not too many cause IIRC the 727 isn't a lockup and in fluid coupling the fluid will FRY with a quickness......

no lock up... and th estock TC is VERY in-efficent...

you need to neutral slam it a few times to check for weaknesses