HAHA thanks for the peep show I already feel like the membership is paying for itself:edit:

305-70-16 , and I had to remove the mud flaps ,, I lifted the front to try to clear the flaps but it accuallly make it worst , So i went with fender flairs also had to replace ball joints 1 month after install , The off set is hard on them and loves to stick the tire out side the body Just FYI and exspect some handling lost compaired to Stock ,, All This should be exspected with any Larger After Market Rim and tire set up , ITs either going to look good or drive good IMO

DM

hmmm i tow 7000 lbs daily, are they a bad idea? haha i should be workin right now but u got me hooked on this rim porn

Lucky me i get off work when you guys are waking up so i get to sit around and watch all this now that i have a computer in the room

I Lost some of my handling and ride Hints the $700 KORE Front Suspension it gave me a good bit back but its not as good as stock , If you go with a larger tire its going to happen your going to lose some handling and create some added stress in places it wasnt before , I was willing to do it ...LOL Just giving a fair warning Im sure others can add there POV's

DM

well i JUST started raining here so i have excuse to hangout here now. can't do mow lawns in the rain:w2:

HAHA, i wish it would rain over here but the rainy season alays seems to be on the oposite of my deployments.

with an 06, it will create even more stress. i'm going from a 6+" backspacing to a 4.5" correct me if i'm wrong

How do you know what back spacing you need. Until my dodge i only loked at stuff i could understand now I want wheels but the backspacing and metric tire sizes throw me off

http://www.dickcepek.com/images/DC1_WheelLg.jpg

Alum

http://www.dickcepek.com/images/DC1_BlackLg.jpg

Painted

http://www.dickcepek.com/images/DC1_ChromeLg.jpg

chrome

---------------------------

Part # Size Appx. Wt.Bolt Pattern Backspace Offset Max Load
958421 15X8 22 5-4.5 3.65” -21mm 2,100
958411 15X8 22 6-5.5 3.65” -21mm 2,100
950421 15X10 27 5-4.5 3.65” -47mm 2,100
950401 15X10 27 5-5.5 3.65” -47mm 2,100
950411 15X10 27 6-5.5 3.65” -47mm 2,100
968421 16X8 23 5-4.5 4.03” -12mm 2,500
968412* 16X8 23 6-5.5 4.03” -12mm 2,500
968482 16X8 24 8-6.5 4.03” -12mm 3,400
960412* 16X10 27 6-5.5 4.52” -25mm 2,500
960170 16X10 29 8-170 4.52” -25mm 3,400
960481 16X10 29 8-6.5 4.52” -25mm 3,400
979402 17X9 27 5-5.5 4.53” -12mm 2,500
979412* 17X9 27 6-5.5 4.53” -12mm 2,500
979170 17X9 28 8-170 4.53” -12mm 3,400
979481 17X9 28 8-6.5 4.53” -12mm 3,400