Sled Puller Wheels......
im stuck guys.....what should i get......
im goin to get the 375/65/16 Baja Claws for the pulling truck...... now i need a wide wheel for them......ive been looking at..... these in 16x14 for $139.00 Off Road wheels 16" Rock Crawler Wheels Racing Wheels Motorsports Wheels Buy MRW these in 16x14 for $279.00 Welcome to 16" MRW Rock Crawler Wheels Off Road Wheels Racing Wheels these in 16x12 for $175.00 Dick Cepek DC-1 Polished these in 16x12 for $171.00 http://www.4wheelparts.com/Wheels/Mi...pn=M%2fT361481 these in 16x12 for $224.00 http://www.4wheelparts.com/Wheels/Mi...pn=M%2fT461481 ill take any other suggestions ya'll got as long as they are 16 inch wheels and 12 inches or wider....... |
some venues wont allow claws or boggers FYI
|
Originally Posted by DieselMinded
(Post 190136)
some venues wont allow claws or boggers FYI
|
i like the fakelock m/t's
|
i wish i could get the Mickey's in real beadlocks.......i think i might just go with the steel beadlocks and paint the ring blue with chrome center caps and lugs to match the rest of the blue on the truck......my traction bars, valve cover and other pieces will be blue.....but i would really like to have the aluminum ones and powdercoat the rings.......
|
4X4 Wheels Mickey style REAL beadlock..... With blue rings too :rocking: Why so wide of a tire if I may ask?
|
Originally Posted by Red_Rattler
(Post 190345)
4X4 Wheels Mickey style REAL beadlock..... With blue rings too :rocking: Why so wide of a tire if I may ask?
the wider the tire, the more contact patch, the more contact patch, the more traction, the more traction, the more distance.............plus it will look flat nasty with a cab and chassis rearend and those dually adapters up front........also the way i figure if i ever decide to go to a bigger class......3.0 or bigger......i will have all the tire i need....... if i get this new job with Dyncorp those mod boys better watch out cause ill be rolling out a tube chassis truck to the likes of that no one has ever seen before........:rocking::rocking: |
Originally Posted by LOGANSTANFORTH
(Post 190261)
i wish i could get the Mickey's in real beadlocks.......i think i might just go with the steel beadlocks and paint the ring blue with chrome center caps and lugs to match the rest of the blue on the truck......my traction bars, valve cover and other pieces will be blue.....but i would really like to have the aluminum ones and powdercoat the rings.......
or if you get ahold of them i'm sure they can build them on a 16x12 |
I've got some of those Mickey Thompsan beadlocks and they are great wheels, but you have to keep em' clean to look good.:tu:
|
|
All times are GMT -5. The time now is 03:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands