Nitrous Bottle Mount Location...
 

This is where mine is at... I know behind the seat is not the most Ideal place but seeing as how I have a dump bed on the truck its about the only option. Thoughts? Think I'll have a problem with all the nitrous being pushed against the back of the bottle under full power high G runs and away from the pick up tube.... :D
Attachment 56647

i can't believe you used High G runs and that truck in the same sentence..... should be fine if you keep it more than 1/2 full....

thats what the :D face was for.... :lol:

Just want to make sure all teh liquid wont slosh away from the pick-up... Im thinking of rotating the bottle in teh brakets so that the pick up is more toward the rear... maybe at like 5 o-clock or so... not much...

ya 4:30-5:00 should work fine.

Thats what I was thinking... gotta figure out how the get teh blow-off tube out the truck now that I'm gonna rotate it... Can I turn the valve in the bottle sepperate from the pick up tube??

I keep mine under the baby seat:)

got a heater on the bottle?

:humm::tnt::bomb::run::w2::pca1:

you missed the :argh::c:

I though it was more like this....

:w2: Attachment 56642 Attachment 56643 :bomb: :nshock: :argh: :bye: :bike:




And no Danny no bottle heater yet... If yo would like to send me $300 I will get right on it.

yeah you got the smilies right RS, especially the one with the tears and wavin bye bye to your head bolts:argh::U:

just get an electric heating wrap from walgreens and wrap it around the bottle

You mean like a heating blanket?

NO leave the outlet at 6:00 and put the blowoff tube out the floor
it'll be fine.... it ain't like you will be puttin down some 1.20 60ft times or anything....

that should work. get the highest wattage one you can find and a good power inverter.... or you could use a propane torch..... <--- not advisable if you have never done it before.... i've only done it a few times myself...... you got to have big ballz ....