10/22 Triggerbuddy
 

After thorough testing and Re-Testing the Triggerbuddy I figured it would be nice to share what I learned from the product!

First off Installation is Simple when you learn how it works and how to put it together correctly.

1. Remove the Trigger Buddy from the box and open the instructions
Attachment 62808

2. Remove the Trigger Buddy from the Packaging and lay out the contents
Attachment 62809

3. Remove the Magazine from the rifle
Attachment 62810

4. Lock the Bolt back and Visually inspect the gun to make sure it is empty
Attachment 62811

5. Push Safety on and visually check for the gun to be on safe
Attachment 62812

6. Install the Right side of the Trigger Buddy into the Trigger Guard
Attachment 62813

7. Install Pin In between Gear and Trigger
Attachment 62814

8. Install the Left side after assuring the retaining plate is flat with the trigger guard and tighten snug (This is critical) Pull down and back until the pin just barely kisses the trigger.
Attachment 62815

Every Revolution is 6 shots so you can really make it fly! If you go too fast you can have a misfire from the 10/22 bolt bounce but Personally once I learned how to make it shoot at the right speed I haven't had any problems. I have put 1500+ rounds through the trigger buddy and it holds up great!

Its a real blast to shoot out of the 10/22 and I love the product hands down its fun to shoot, easy to install once you learn how it works and it doesn't scratch up your gun like the BAF aculator. You really have control of either firing one shot or 50 and you can do it accurately and safely!

Here is the Video from the triggerbuddy website
http://youtu.be/lfxa3DCxSQI

As a Disabled Firefighter I have been hunting for that adrenaline rush ever since i was hurt and every time i am sitting at home alone bored going out and blasting a few hundred rounds down range with the feeling like I am using a full auto puts a HUGE smile on my face!

http://triggerbuddy.us/

I am not an employee of Triggerbuddy. Other than having conversations with the owner of the company on installation and giving feedback on how it works from my view. I am working on getting a good photo instructional on installation for his company because he has helped me out allot on how to install the product and gives me a good conversation once in awhile now that we are buddies.

I want a AR-15 trigger buddy:jump::yeah::rocking::tu:

Just get a Slide Fire stock....:w2:

At, 10x the cost! :scare2:

I would much rather pay $30 than $300.

But as a little 10/22 add on Trigger buddy is pretty awesome

THOMAS you did a fine job explaining the trigger buddy:tu:

Thanks man! I know without good instructions installation can be a pain but once you understand how it works and how to install it then it is a breeze to do!

Just trying to give DB members the newest and coolest products I can find!

I doubt that he will achieve getting a patent on the product,as I have a similar product that will empty a 50 round mag from a 10/22 in seconds. It is over 30 years old

It's patent pending which means its approved but needs the $6000 in sales to pay for the 25 year patent and its already ATF approved.

Maybe the patent on the one I have has been allowed to expire.

What is it? A Gatling gun BAF? I know it's patent is up and has been up for 3 years or so.

The reason Triggerbuddy was made was to give the Gatling gun rate of fire but allow for more accuracy with the ability of still being able to hold onto the stock and use one finger to activate instead of needing a whole arm.