Project "The Sleeper" 12V Cummins
 

1994 Dodge Ram 3500 Single Cab long bed 4x4 12V Cummins #0 Fuel plate, afe and pump work(tuned to burn the extra fuel), ATS Transmission with Triple disc torque converter with lock up switch and all different color :D

Plans:
Fix few minior itiems
Pyrometer/Boost/Tranny Temp/Fuel psi gauges
Triple Gauge Pillar pod and steering clouom pod
5x12 or 5x14 SDX Injectors
191 DV's
62/65/12 S300
4" Downpipe
Straight pipe to dual 6" stacks(kept stacks from the 24V)
Alipine with aftermarket speaks
new seats
pull carpet, insulate and roll on liner
roll on liner for bed
goosneck hitch
Maybe paint if I do paint it'll be blue and silver or black and silver

http://inlinethumb11.webshots.com/10...600x600Q85.jpg

Ordered 4" dimond eye straight pipe today, will have it on before the weekend(just in time for river ranch new years weekend!!) Also going to get valves adjusted this week, install radio, install exhuast and hopefully get a new driver seat. Then gauges/air intake and 5x12 injectors after new years and getting painted professionally after new years.

Put aftermarket driving/fog lights on yesterday

http://inlinethumb26.webshots.com/43...600x600Q85.jpg

nice !:tu: i have the same truck.. keep us updated!:c: and post tons of pics!

Thank you sir!!! Will take many pics and some vids! Cant wait:jump:

sounds like its going to be badazz!!! keep us posted and yes lots of pics....:jump:

where you located. trade you the white bed for a red one.

Im hopeing she'll be pretty bad, but we'll have to see :c:

The truck got spray painted black as I got tired of the different colors. Beggening the of year or so hopefully start to sand, primer, paint and clear coat and have the truck looking really good!

lookin good

Thanks man!! Tring

12-30-10 4" Diamond Eye straight pipe, will have more pic's later as my buddy Matt at Eagle Automotive and PErformance was busy working on our buddy's buggy and couple mud trucks and buddy's derby car getting them ready for the weekend, so didn't get many pic's. Much better then the stock hacked off exhuast!!!

http://inlinethumb36.webshots.com/35...600x600Q85.jpg

http://inlinethumb55.webshots.com/46...600x600Q85.jpg

BTW Getting truck painted spring time!!! VERY EXCITED!!!

---AutoMerged DoublePost---

Here's what was on the truck before

http://inlinethumb39.webshots.com/42...600x600Q85.jpg

1-02-11 Back from river ranch, new years was great and the ol cummins did great!! Loving the 4" straight pipe!!! Can't wait for gauges, 5x12 injectors, radio and brand new paint!!

http://inlinethumb48.webshots.com/15...600x600Q85.jpg

http://inlinethumb17.webshots.com/35...600x600Q85.jpg

Looking great! :tu:

Thanks!! Can't wait for new paint (professionally done), smoked cab lights, projector headlights, LED black taillights, bhaf injectors, turbo, guages, etc....:rocking:

---AutoMerged DoublePost---

Gauges then injectors or Gauges and 4K gov. spring kit/191 DV's?

Which one first after gauges?

gov springs, then if you want more injectors/ turbo.

So do ill do gauges, 4K gov. spring kit, 191 dv's, then injectors/turbo

IMO gauges, 4k's, injectors/turbo ... and if you want more than DV's.

I gotcha. Also was wandering, truck seems like it doesn't have much low-end power, which fuel plate would be good for low-end but still not lose to much power for up top?

hey, bad93.... what is river ranch? sounds sweet!

1-04-11 Had to go get my mom/dads friends car today(blew timing belt going down interstate so motor junk). The ol cummins did great as always(had hook up as we had to hook the cables of the winch to my battry to run the winch). Hopefully order 4,000 gov. spring kit soon then GAUGES!!!

http://inlinethumb29.webshots.com/26...600x600Q85.jpg

---AutoMerged DoublePost---

River ranch is down here in floirda. Its 70 sq. miles of trails, mud, rodeo's, etc.. Got a few buddy's with property out there with camps setup(nice trailers out there with running water, heated water and full power)

---AutoMerged DoublePost---

Here's the wheels id like to get or the black XD diesel wheels

XD Series Matte Black And Machined Addict -RH3

1-05-11 put new sway bar bushings in

Here's the old one's lol

http://inlinethumb04.webshots.com/50...600x600Q85.jpg

Here's the new bushings

http://inlinethumb05.webshots.com/35...600x600Q85.jpg

Tommrow trucks getting new tranny pan gasket and filter, New radio and hopefully have time to swap gauge cluster out.

---AutoMerged DoublePost---

1-04-11 Also yesterday had to put new tranny cooler on(got a steel plated one) as the old aftermarket cooler sprung a leak.

http://inlinethumb10.webshots.com/30...600x600Q85.jpg

the 4k gov kit will fix your lowend power issue. and i would yank that plate also. mine runs amazing without a plate... but if u wanna run a plate i have a 100 plate u can have for shipping cost:tu:

Ya I think ima pull the trigger and order teh 4K kit, I need more low-end power and more power all together, lol I think ima pull the plate out and see, but thining I should wait intill I order gauges.

---AutoMerged DoublePost---

1-07-11 Put the cummins to the test yesterday!! I didn't like all that weight at low-end(need more power), but didn't do to bad, got it home, but that little backhoe did lift the whole ass-end up all the way off the ground! lol I was suprised. But might have to rethink career paths as been loving that backhoe all weekend.

http://inlinethumb40.webshots.com/47...600x600Q85.jpg

http://inlinethumb59.webshots.com/15...600x600Q85.jpg

1-25-11 Bhaf installed. Going to order 4,000 gov. spring kit this friday

http://inlinethumb35.webshots.com/42...600x600Q85.jpg

Lookin good dude! Lookin at all this makes me feel like summer wont come soon enough and I can start on mine!

Thanks man!! I can't wait to get body work/paint done, smoked led cab lights, 4K gov spring, 5x14 injectors, S300 turbo, pyro/boost/tranny temp/fuel psi gauges, new tires/wheels, new interior, led smoked taillights, projecter headlights, etc...

Nice Build!

Thanks. Ordering 4 K gov. spring kit tommrow!

what u doing with the rims on it now?:w2:

Project "The Sleeper" 12V Cummins
 

Trade ya an 89 d250 w/ cummins for that suzuki samurai in the first pic!!

I've got a similar list for mine, but I'm just gonna do perf stuff this summer. But I want clear headlights, HID's, new interior, new wheels/tires, etc. later on down the road.

Im going to sell them once I find a set of nice 17-18" wheels.

---AutoMerged DoublePost---

I'll do that deal but got rid of it about a month ago, Damn it!! I knew I should of kept it

---AutoMerged DoublePost---

Ya I need to get me a guaranteed full time job so I can start marking stuff of my list of things to do to the truck and then get a 2nd job so i can spoil my ol lady. Just need money! lol

Project "The Sleeper" 12V Cummins
 

Well then, got any other mud trucks you'd be willing to trade?

sadly no, been out of mud trucks since I have atvs I got rid of hte mud trucks. What kind of price would you let it go for?

Project "The Sleeper" 12V Cummins
 

I'd let it go sadly for $2500. It's got 12/11 inspection stickers and it's ready to drive anywhere. Needs some body work but what 22 year old dodge doesn't. Thing runs and drives Better than my 01. The ONLY reason I want to sell it is for compound turbos for my 01. Otherwise it wouldn't be going anywhere

Project "The Sleeper" 12V Cummins
 

Here's a pichttp://184.72.239.143/mu/ae82dd32-1e98-026d.jpg

Dang wish I had $2500 Id get it off your hands in a heartbeat

Where you located?

Project "The Sleeper" 12V Cummins
 

Pittsburgh Pa