Bumper Air Dam Painted PICS!!!
 

Well after a little bit of frustration and a little bit of elbow grease, I was finally able to paint my air dam. First thing I would like to say is: It's great to have good friends who are there to help you, if it wasn't for my friend Evan, I wouldve probably screwed this up.

Taking off the air dam was a real bitch, the three center clip holders were a pain in the ass. But once we FINALLY got the air dam off, we cleaned it with 91% rubbing alcohol. After cleaning it, we added a coat of adhension promoter. We let it sit for 15min before we started painting it.

After letting the promoter settle in, we started painting.We used Krylon's Fusion Plastic Paint. Now it took a couple of sprays to get the right coat on and making it look clean. The paint dries pretty quick. After we felt that it looked right, we let it sit in the garage over night. Today we installed it back onto the truck. NOTE: I only drive my truck on weekends, it stays in the garage during the week, so it has plenty of more time to settle in. So here's some pics...

BEFORE


Attachment 44894

AFTER
Attachment 44895
Attachment 44896
Attachment 44897
Attachment 44898
Attachment 44899
Evan hated Chevrolet after we was finished lmao
Attachment 44900

Looks good man! :tu:

just curoius, do u got any lift to clear them tires? i just got a set of 18's with 285/60r18 on them. looking for new one and little bigger.

bumper looks great. i need to do same thing.

its just leveled, torsion bars turned

mine is just bars turned up 3 turns.
needs better tires, looks to "dark" for me to be driving.
Attachment 44869
Attachment 44870

just saw you on diesel forum , looks good

Looks good. A lot better than the stick gray look. :tu::rocking: