decal, removal and installation
 

here is my first try at a diy. my first topic, removing a decal and installin a DOF one. sorry bout it not being a db one, but all my db ones are on the truck

here is the one being removed
Attachment 51045

then u take a razor blade, and slide it under the bottom edge of the decal, a slight angle
https://i927.photobucket.com/albums/...1256170677.jpg
https://i927.photobucket.com/albums/...1256170929.jpg
https://i927.photobucket.com/albums/...1256171029.jpg


next u take the new decal, and peel the backin paper off, making sure u dont take the deal off with the backing paper/
https://i927.photobucket.com/albums/...1256171098.jpg
https://i927.photobucket.com/albums/...1256171161.jpg
https://i927.photobucket.com/albums/...1256171196.jpg


now to stick the decal on.
first spray a light coat of soapy
https://i927.photobucket.com/albums/...1256171273.jpg

next, put the decal up to the window, it dont have to be pefectly straight at first, cause usingsoapy water, u can adjust it.
https://i927.photobucket.com/albums/...1256171301.jpg

then u can take the edge of a credit card, and squiggy all the soapy water out from behind the decal, and there are no bubbles in the decal.
https://i927.photobucket.com/albums/...1256171311.jpg

finaly, wait 30 minutes or so, for it to dry real good, sometimes longer, sometimes shorter, depending on the temp. then u take the edge of the front piece of paper, and slowly pull it off, pressing it back against it self, going slowly, making sure it dont try to peel up
https://i927.photobucket.com/albums/...1256171346.jpg

then u can just stand back and look at it :clap:

Nice Job :U:

hey ed.. next time turn the credit card over,, ???? lol

it is canceled curtis, so dont try to steal the number :ph:

also, use windex or water in a spray bottle cause it'll help let the glue slide off the glass and razor better. or buy some solvent for tar removal and glue removal. for tar on rims, use wax and compound with a detailing sponge. comes right out.