anybody use one of these
|
what do you plan on using it for? keep in mind is rated for 6k. my truck is nowhere near that light
|
Bud has two in his body shop and they work very well for what he does. Keep in mind you have no access to the bottom of the vehicle when its on it.
|
so it'd pretty much be for body and tires but not much else. you might have oil change access too. not sure
|
depends on the size of the vehicle if you would or not oh and btw it lifted my 12v no prob :D
http://a6.sphotos.ak.fbcdn.net/hphot..._8023970_n.jpg |
nice jake
|
Originally Posted by Red_Rattler
(Post 730792)
depends on the size of the vehicle if you would or not oh and btw it lifted my 12v no prob :D
http://a6.sphotos.ak.fbcdn.net/hphot..._8023970_n.jpg |
I understand that, didnt say its desgned to do it but it did it and yes it went all the way up, lot easier to work on the rockers and lower cab sections while sitting in a office chair as well the roof while its lowered all the way down with no tires. It was on the lift for four days and no issues.
|
nice now i'm wishin i had one for my project but as long as you checked for stability before you do anything i'd use it. might be a little wary of crawling under the truck unless there is a mechanical lock of some sort
|
It has a lock but yea wouldnt get under it either way :w2:
|
All times are GMT -5. The time now is 04:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands