Loosening Turbo/Exhaust bolts
This might be a stupid question, but I am curious how many have had trouble getting the bolts loose on their turbo/exhaust down pipe mount. Looking at mine I would not be shocked if they have not been loosened since the truck new. I did shoot a bunch of WD-40 on them tonight and will do so again tomorrow morning. I didnt know if some one had a trick on getting them loose with out snapping them off.
|
are you ttalking about the bolts that conect the exhaust elbow to the downpipe or the v-band clamp that conects the elbow to the turbo exhaust housing?
|
Step up from WD40... Go get you some PB Blaster! Soak them good a day before and then about an hour before and take em out!
|
x2 you need PB blaster. I never gave into people saying that crap works, but unfortunately for my reasoning skills it does work THAT well. :argh:
Spray it the night before, the morning of, and an hour before you try to get them off and you shouldn't break any off. :U: |
Thanx for the input, I did soak everything with WD-40 last night about 3 x and again this morning. Once I had the pipe out from under the truck I was able to break the bolts free easily. BUT I decided to loosen the V-Clamp and take the pipe loose that way. I ended up breaking the bolt on that clamp. I even had sprayed it too. So now I am waiting to get a new one tomorrow. The nearest Dodge dealership that had one in stock was 3-4 hours away. I checked with all the local semi dealers as well and basically no luck either. So I ended up ordering thru the local Sterling dealer and should be in tomorrow.
|
Originally Posted by RSWORDS
(Post 345930)
Step up from WD40... Go get you some PB Blaster! Soak them good a day before and then about an hour before and take em out!
KanoLabs.com This stuff is also good: NUTS-OFF PENETRATING OIL :: Del Vel Chem Company WD-40 is useless. |
Kroil all the way baby........use it daily at work and its the best
|
I use a lot of BG In-Force at work and its amazing stuff
|
Originally Posted by sawyer45306
(Post 346044)
I did soak everything with WD-40 last night about 3 x and again this morning. I ended up breaking the bolt on that clamp. I even had sprayed it too.
Originally Posted by Dr. Evil
(Post 346047)
WD-40 is useless.
|
We use a shitload of PB Blaster in the mill i work in...dont know how Kroil could be better!
:guns: |
All times are GMT -5. The time now is 03:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands