5x12 injctors, dana 60 and 70 parts
i have a set of 5x12 injectors for a 12valve, $350 plus 6 good cores, they are only about a year old, pop tested and are in great condition also are the correct spray patteren
dana parts are d70 ring and pinion matched 3.54 gear ratio-$65 plus shipping d60 posi carrier-$150 d60 open carrier 4.10 and up gears $30 d70 open carrier $30 ford dana 60 spindles off 97 and older axle, $70 1410 and 1350 yokes $35 each all prices are OBO and plus shipping |
on the d60 open carrier you say 4.10 and up so its the same as the 3.55 or not?
|
im pretty sure its for 4.10 and numerically high gears, because i also have a few carriers that had 3.55s on them and they are two different carriers and from what i can find on google this one i have is for the lower gearing
|
Dana 60 and 70 are both 3.54 and 4.10 carriers.
Dana 80 is 4.10 up OR 3.54 only. Mark. |
so that carrier wouldnt work for 4.56 to 6.17 gears then
|
according to him no, but i found a web page that states that the part the ring bolts to is thinner on the 4.10, 4.65 carriers than it is on the 3.54 carriers and i can see without measuring that there is a difference in my two carriers, maybe i can find some exact measurements and determine for sure what it will work with,
its a d60 open carrier out of a sport 2500 dodge truck that had stock 4.10 gears |
You can slam anything into a D60
|
ok then it wouldnt work for what i need, thanks tho
|
whos 5x12s?
|
a guy out of texas, not sure on the company name but they were brand new and are the correct spray for our 12vs, i swat 370s for these 5x12s and love them over those 370s
|
All times are GMT -5. The time now is 08:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands