Holset He351Ve turbos for sale (7 available) Acworth, GA
 

I have 7 Holset HE351ve turbos for sale. Some have the elbows, some don't. All are in good shape and were removed from running / driving motors. Motors ranged from 140k to 185k. Asking $260 each on the non-elbow units, and $290 each on those with the elbow. Can ship anywhere via UPS ground.

These are in specific order based on where they are sitting on my shelves. If you want one, please specify the number of the turbo.

1. no F-R shaft play, little bit of side to side, all wires intact
2. no F-R shaft play, tiny bit of side to side, all wires intact, has elbow
3. no F-R shaft play, tiny bit of side to side, all wires intact, has elbow
4. no F-R shaft play, little bit of side to side, all wires intact
5. no F-R shaft play, little bit of side to side, wires were removed
6. no F-R shaft play, little bit of side to side, wires cut, but still there
7. no F-R shaft play, little bit of side to side, wires cut, but still there

On the side to side shaft play, tiny bit means I had to push very hard to get it to move side to side a minuscule amount. Little bit means there is a little more side to side play, but still a very usable turbo without having to be rebuilt first.

For those without elbows, I have some extra available from previous turbos. So if you need one, let me know. Post, pm or email me at ryan@partingoutdiesels.com if you have any questions. Thanks!

Holset
 

Wouldn't happen to have 341?

no, just the 351's at the moment

do you ship to canada?

yes. there is a little more paperwork to fill out (I usually add a few bucks depending on how long it takes), and you'd be responsible for the customs costs / etc.

What size are these turbos? Never heard of this particular one...

they come on the 6.7L Ctd's. I believe it's a 60mm compressor. They are a variable vane style.

why do you have so many? are you a salvage yard?

HE351ves are the same turbo that is on most of the CR Cummins just variable vane.

60mm Compressor inducer and 60 mm turbine exducer .

A year or so ago you could pick them up all day on Ebay for $100. They got changed out alot due to sticky vanes or failed actuators.

They are hard to find rebuild kits for as Holset doesn't sell them. Has to be rebuilt by Holset

Little too small for my application... But thanks!

HTT and Fleece Performance I think are offering 62 and 64mm compressor wheels for it. On the ex housing, I've heard figures as much as 25 CM they will open up to.

And as for rebuilding, It looks like they are slightly easier to get rebuilt now so I have to retract my earlier statement.

Fleece also sells an electronic controller for these as well.

nope, not a salvage yard. Buddy of mine hauls cores for machine shops and repair shops, and had those plus several other makes. I needed one for a project I was working on, and a buddy with a DSM needed one, so I picked them all up as the price was good. He was going to drop them off at the local recycle yard, and I thought they'd be better served being put back on trucks.