dodge leftovers
 

BD RAD box off my 02. Worked fine just don't have a need for it anymore. Only used once before P-pump swap $90 shipped in USA

Quad Pulse monitor for 2nd gen 24v, worked fine when removed but has a small crack on the factory plastic mount $100 shipped in USA

Stock GSK from a 175 pump. Pump had less than 1k miles since new from dodge. $30 shipped in USA

Stock cast discharge elbow for hx35 or S300 turbo's with clamp $40 shipped in USA

Stock fuel plate from a same 175 pump as GSK $20 shipped in USA

Stock 24v injectors. Sold as cores. they ran fine when pulled out but have been on the shelf for 4 years so they will need to be gone through and cleaned up $100 shipped in USA

HY35 from my 02, sold as a core. I pulled it off 4 years ago and it has sat on a shelf since. $100obo shipped in USA(PENDING)

12v P-pump fuel lines, still have clamps on them but Have been sitting for a while$50 shipped

stock 24v fuel lines, still have all clamps but have also been sitting $50 shipped(SOLD)
24v timing case $75 Shipped in USA

Stock fuel filter canister for 24v $30 shipped

Stock 24v exhaust manifold tapped for EGT with no cracks. It does have a stud broken off but could be pulled out easily $80 shipped.

I will also trade towards a set of 024 dv's or some of SDX's super awesome DV's or a CDS 5k GSK or other neat stuff I may find interesting. Feel free to shoot me PM's on anything

---AutoMerged DoublePost---

I also have a complete 12v head from a 160hp truck that melted the #6 piston that I will part out but not ship the whole thing.

Is that just the monitor or does it come with the performance chip as well

Pulse, turbo and 24v lines are sold.

What shape are the 12v lines in? any corrosion?
Thanks

They could use a cleaning and a blast with an air hose but they are all there. What is your Email I will try and get you some pics.

Are those pics coming? I would be interested if in good shape.
Thanks

---AutoMerged DoublePost---

Knock Knock anyone there?