what all is left?

Have it but wont sell it to anyone. It's a pos aftermarket one.

P-pump is long gone

Most of the interior, body, axles, frame, and a few misc engine components.

what gears where in it?

How goods the body?

3.55 gears... Passenger side of the body is pretty good but the driver is pretty beat up.

you would happen to have them stricks on the outside of the door sill wopuld you?

How about a price on the Tow Mirrows?

---AutoMerged DoublePost---

Nevermind I see there gone :argh:

think ther gone already luke

Hey I'm looking for a PCM for a 97 with manual. You got one? how much shipped to hamilton ohio 45013?

The part #s that work are:
5012992aa,ab
56040451aa
56040500aa,ac

some of the numbers start with a P, the numbers are ones in the center of the PCM along with the big bold ones.

Thanks, Derek

how much for the axles?

---AutoMerged DoublePost---

or just the gears

yep tow mirros are gone

axles 800 for the pair, wont sell just the gears

Yes I have the pcm, shoot me an offer on it. I will check the pn's in the am to be sure it will work.

downpipe/whole exhaust?

Sold

Do you have a wastegate actuator?

no sorry.

u still got the Exhaust manifold ?? how bout the turbo??? shipped to 53058

u still have the exaust maifold if so would it fit on an 01 dodge???:humm::humm::humm:

what about the overhead counsole with thermo in it

I dont think a 12V manifold will fit on a 24V

Yes still have the manifold. $65 shipped? Turbo is gone.

Yes I have 2 of them. 1 with cubby and 1 with thermo.

That's correct :U:

Parts
 

I would be interested in a inner fender P.S. and the sending unit out of fuel tank. Thank you and have a great weekend.

Sending unit I have. Shoot me an offer on it. I have the inner fender, big parts like the inner fender I will not ship.

Parts
 

Sorry to have mislead ya.Interested in the plastic inner fender splash guard(sounds good).And does 50 bucks seem like a reasonable offer for the sending unit? Thanks.

P-Pump
 

How much for the p-pump and lines and timing cover?

How about a price on the timing gear housing?

Yes I knew you meant the plastic part. Sorry I will not ship oversized parts. I end up getting the shaft in the end for shipping, so I just don't do it anymore.

Sold

Sold

Sending unit
 

Do you mind me asking about the sending unit? Sorry to bother ya if it's not enough.

:pm:

do you still have the head with the 60 lbs springs in it? i cant send pm due to post count. if you still have it send me an email. why165@yahoo.com

Still have the springs yes. Not gonna sell the head now. Got it off and it doesn't look to be in very good shape.

How bout the pistons? I've got an engine with a cracked piston that I need to replace...

1 piston is totally smoked another is pretty much smoked. The other 4 look to be good.

Still have the intake manifold?

EDIT: read back thru the posts, see you sold it. need a non egr 12v horn so my egr can fall off

i need the transfer shifter assembly with boot and linkage

i will be converting a 2wd to 4wd

also please quote me

if you willing to sell all the bracketery needed to do the swap from 2wd to 4wd
(the control arm brackets and coil brackets , Track bar, engine craddle)

Transfer shifter and boot I have...


Sounds like you need the whole front half of the frame? All the coil and control arm brackets are welded on...

Do you have the intercooler piping still? How about that eaton nob?

Thanks:pca1:

PM me please

Piping sold, still have the eaton knob tho!

the fuel plate and waste gate and what size are the injec.. in it stock? and what was done to it ik not selling hole truck?
:humm:

fuel plate sold with pump... wastegate sold with turbo... injectors (370's) sold already..

Do you stiil have the oil pan off that engine? I think it would work on an 01' 24 valve?