Upper radiator hose assembly for dual CP-3
I'm in need of an odd part...
I'm working on my 2003 Cummins Dodge and I've run into a issue. My stock lift pump died and I bought an Air-Dog to upgrade the fuel system. My problem is: the Air-Dog fuel supply line to the CP-3 goes right where the belt driven vacuum pump for my Jakob's exhaust brake sits. I was able to fab a bracket to re-locate the vacuum pump to where a 2nd CP-3 would sit from a dual CP-3 kit, but now the upper radiator hose hits the the vacuum pump and it's pulley! I've got a very temporary "fix" for the problem cobbled together that involves a piece of 1 3/4" exhaust pipe the the upper hose from a 1977 Ford F-250 Hi-Boy, but obviously it isn't right. I figure a proper solution would be the upper radiator hose assembly from some manufacturer's dual CP-3 kit. Anyone know if these can be purchased separately from the rest of the kit and if so, what would it cost including shipping to 44903? Thanks in advance, Brian |
I seen somewhere about some heavy duty bendable hoses, I don't know if that would work, maybe...
---AutoMerged DoublePost--- Crap, sorry i didn't realize I was in the quote section. I can't figure out how to delete this post. |
Originally Posted by Billy D
(Post 538464)
I seen somewhere about some heavy duty bendable hoses, I don't know if that would work, maybe...
---AutoMerged DoublePost--- Crap, sorry i didn't realize I was in the quote section. I can't figure out how to delete this post. |
All times are GMT -5. The time now is 11:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands