2500 wheel bearing
 

only need the front wheel bearing not the whole hub assembley. 1998 2500 4x4 dana 60

Believe that's going to be a dealer part or you can pick one up at a parts store.

called every part store in hawaii nothing!

ive never been able to find them that isnt the entire hub assembly

Thats because you cant get it. Its sealed unit - you have to buy the whole hub.



Most of our Sponsors deal heavily with performance parts - not everyday OEM parts.

it would be nice if you could purchase just the bearing because thats a waist of money and steel for the entire hub

what about going 2 a bearing maker an having them make'em?

most likely cost more to do that them buy the correct part. once i get my new ones (if these ever go out) i want to tap a hole and insert a zert fitting so i can grease them when i greeses all my other fittings

have you had 2 buy new hub assembleys? and is that what ur talkin about puttin a zert fittin on?

not for this truck i havent yet but my budy (farm boy) has a few times. ya my brother did that on his truck. he drilled a hole in the top of the race and threaded it with a 90* zert. he drilled a 1/2 hole threw the spindal to be able to gease it when he wants. hes ran 60k miles so far with them that way and there still just as tight. i know they can be service. the first time i had mine off i acadentally spearated the two pieces with a 3 jaw puller. i smothered them with gease them put them back together

i got mine all back together an coverd them in grease. think it will hold up?

shold mine have for 2 years and mine spends alot of time in the mud and various climates with temp down in the -20 in the winter

sweetness! i dont plan on muddin this one, an i hardly use 4wd.

the only reason i had mine separated is because the first time i did it when i repaced the u-joints, i didnt know there was 4 bolts that hold the wheel bearing on. o tried pullin gthe hub off with them 4 bolts still attached and it separated the bearing. i smeared the bearings with high temp, high pressure grease befor puttin them back together