Good Clutch To Hold A 6-Speed?
 

I have a 03 d-max w/ a 6-speed. Ive owned the truck for about 6 months now, and the clutch slips in the last three gears, but goes to normal after pumping. Ive replaced it twice with the stock clutch, and the last time i did the slave and master with it. It starts to slip after a few days, does anyone no of a little heavier duty one, that can handle alot of abuse from pulling heavy loads.(and alittle playing) Anything is appreciated.

A Valair or a SouthBend Clutch will do the trick.

Are you running any tuners on your truck, tell is more about it

Dynadroit.....

DynadroitClutches.com | Home

I think the truck has a programmer on it when i bought it and I put a 5 in straight exhaust. But I pull a 40 ft trailer and gross heavy, and use it everyday for work. So it gets alot of wear and abuse.

Southbend :up:

South Bend Clutch - High Performance clutches, Ford Power Stroke & Dodge Ram Truck clutch kits, feramic and ceramic disks, Kevlar pilot bearings, and heavy duty clutches for passenger/racing cars, agricultural and midsize trucks.

South Bend Clutches, they are site sponsors.

I know where u can buy one :w2:

my opion is that there is no other clutch other than southbend xpesialy there dd, i didnt break it and thats saying alot