fuel line modifiction
ok im updating my fuel lines to 1/2 this weekend and was thinking about useing pex pipe? i was wondering if that stuff would hold up to diesel fuel? the reason i ask is because im a plumber and have lots of fittings and pipe laying around. or dot break line maybe?
|
The stainless variety?
|
stainless
---AutoMerged DoublePost--- always use stainless on those parts |
no plastic pex pipe and brass fittings
|
why 1/2"? 3/8" is plenty
|
I picked up some 1/2 inch hose from NAPA that was approved for any fuel, it's good heavy duty hose. I can't remember the price but I was suprised at how cheap it was. I ran it all the way from the draw straw to the lift pump, and I know I didn't need 1/2 but figured if I wanna go with an aftermarket pump and dual feed in the future it would already be there since I had to do fuel lines anyways. :c:
|
thats the route ill mostlikely take is the mult fuel the reason for half is because my cummins is starving for fuel with the factory 1990 f350 fuel lines
|
All times are GMT -5. The time now is 09:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands