hx35 wastegate
Has anyone had any issues wiring the wastegate shut on a hx35? I have a 93 that I put a hx35 exhaust housing and the wastegate won't fit. I put in a boost gauge and EGT, and have only done one turn of the power screw. I don't really pull anything heavy, should I have any isssues? Thought maybe I would make a cable operated wastgate control incase the boost got to high
|
Post this in the 12v Cummins section dude.. you'll get way more answers there. Wiring shut the WG is a bad idea in my opinion.
|
The wastegate is there to prevent the turbo from overspeeding. If you don't want a wastegate you need a turbo with a larger A/R housing so the engine won't blow it up.
|
im running a hx35 with a plugged wastegate im at 40 psi of boost it is fine for now if anything i might waste the charger but i want a bigger one anyway
|
At 40psi the turbo is extremely inefficient and overspeeding. Good luck saving your engine when the compressor grenades.
|
i have already popped a couple turbos both of mine shot the exhaust wheel out the stack and if it does it does you pay to play bud thanks for the good luck also
---AutoMerged DoublePost--- question what do u run? |
Well, I'm running a stock 93 12v with 1 1/2 turns on the power screw and I have the stock H1C comp. housing and have yet to hit 20 psi, but I havn't been over 2200rpm's or pulled anything. I can't imagine that I'm gonna go much over 25psi on a stock 12v anyway, just not enough fuel
|
All times are GMT -5. The time now is 03:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands