my custom muffler
5 Attachment(s)
so after a few long trips with the donor i came to the conclusion that i need to quiet it down if the mrs is going to be in the truck. i decided to make a muffler and put it in my bed since it will be hidden by my tool box, then the stack can come out of that. i looked at a few designs online then drew up a few ideas on paint. once i figured out which i liked i printed it out and figured out the dimensions for it. i made it 20" x 14" x 5". i was able to get some 1/8" steel plate for free from a friend so thats the route i went.
here's some pics of it as i was going. with a standard sized tape measure in it Attachment 47234 Attachment 47235 http://img.photobucket.com/albums/v7...0512001201.jpg Attachment 47236 the top piece to close off i cut out where all the pieces were so that i could weld them to the top to make all the sections sealed off. Attachment 47237 and here's a quick one of how it sits in the bed Attachment 47238 it is SOO much quieter now. i can hear the motor while driving, not just exhaust. and that is with a stack thats about 8" tall and curved a little towards the rear. it will get a full stack once i get enough pipe. this is what it sounded like before http://smg.photobucket.com/albums/v711/SSpeeDEMONSS/?action=view¤t=P5190363.flv http://smg.photobucket.com/albums/v711/SSpeeDEMONSS/?action=view¤t=P5190363.flv and after http://smg.photobucket.com/albums/v711/SSpeeDEMONSS/?action=view¤t=P5190364.flv http://smg.photobucket.com/albums/v711/SSpeeDEMONSS/?action=view¤t=P5190364.flv the videos really dont do the sound difference any justice. also, i know its not the best design for a turbocharged motor but i am going for the most sound reduction and could care less if i lose 30hp. Garrett |
Great job!:c:...I can hear the difference, the resonance is not as loud as before...I have to ask why you use such a short stack...if you increase the length it will become even quiter:pca1:
|
that was all that i had, i dont want to cut up my 5". im going to go find some 5 or 6" pipe to finish it off.
Garrett |
All times are GMT -5. The time now is 08:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands