Custom Jumper Cables Deluxe
 

I decided it was time to build a good set of jumper cables for my truck.......they are about 15 foot long

http://img213.imageshack.us/img213/2528/jumpers002.jpg


http://img513.imageshack.us/img513/2263/jumpers001.jpg

nice whit.

What connectors are those? We used the quick connects that fork lifts use on there batter packs but those look nice.

you need batteries?

those are welding connectons, I hooked the male to the frame for a good ground and then the female that is poking out there is hooked up to the positive lead where my 2 batteries connect common............then its simple ya just pull the cables from the tool box in the back and hookup to the quick connect leads that are pokin out...........dont even hafta lift the hood :rocking:

I think thats a bit better of a setup...these welding connectors might have been of the free variety....

"fell off the truck"

But seriously why not get battery's that are not dead ?

ive seen Kenny switch a Cummins to 1 skidder battery

need both batteries out here Chad......gets real cold

seams I am always jumpin someone :w2:

what happens when you piss off an x girlfriend or ex boyfriend or cut someone off in traffic and they connect those 2 connectors together?

X girlfriend dont know how to do that and I dont have any x boyfriends

Good question Benj.........................I need to make sure that dont happen