front wheel bearings
can anybody tell me how to repack my front bearing on my 04 f350 dual wheel, and if they can be rebuilt.:humm:
|
i dont think these bearings are rebuildable you'll just have to go buy the hole thing new:argh:
|
to repack the bearings most people take a hand full of grease in one hand and with the other hand rub the bearing threw the grease :U:
|
Unit Bearings can't really be rebuilt. Only replaced. I've heard of people taking the hub out and splitting the case and regreasing the bearings then putting it back together but I've never done it myself.
|
You can service them if they are still in good condition. Do you have a 2wd or 4wd? Welcome to guzzle's 4x4 Needle Bearing Maintenance Web Page Go to that page for a how-to on the 4wd bearings.
|
EMS Offroad get there "free spin" kit and you can service the bearings.....
|
For the $300 for a new bearing, anythings better than nothing.
|
found complete front hubs with bearings and ABS sencor from AM Parts for 350.00 a pair. 4x4 2000 f-350 drw.
|
i would of went with these, atleast you can still service the bearings in these, the next hub that goes bad is going to cost another 125 bucks, if you would of done this your next wheel bearings would of cost about 30 bucks.......
Front SpynTec Conversion Kit For Ford 99-04 [SAST-F9904] - $0.00 : EMS Offroad, When You're Ready For The Next Step |
All times are GMT -5. The time now is 10:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands