00' 7.3 died and will not restart
The other day i was driving my 00' 7.3 and it randomly shut off making a left turn no popping or sputtering, just died. It has fuel pressure, wait to start light comes on etc tach doesn't move though, changed in three cps. icp and ipr? i believe. still nothing and no tach movement, doesnt have oil pressure or oil in the hpop reservoir either could this be the low pressure oil pump? or high? also could the lack of oil movement cause the lack of tach movement? ive heard about filling the hpop manually should i do this?
little history/info: stage 2's, suncoast tranny, GT38R turbo, 4.56 on 40's... i recently burnt out my pcm but purchased a new one which the truck ran fine with for over 6 months. Got these codes at first P0113 P0500 P0475 P1209 P1212 P0470 P1211 after resetting the codes and trying to start again i got P0113 P0475 P0470 Thanks in advance. |
Can you get a manual LPO gauge? something that reads 0-30 psi would be fine for testing... If you have no LPO and the HPO res is empty it does sound like a LPOP.
|
i have seen bad cps from ford and that part is a recall.... also if your tach isn't moving then your computer isn't seeing your cam move, are you blowing any smoke you are getting fuel,
|
Originally Posted by 2005_6.0_stroker
(Post 796737)
i have seen bad cps from ford and that part is a recall.... also if your tach isn't moving then your computer isn't seeing your cam move, are you blowing any smoke you are getting fuel,
|
did you check voltage on your ipr... maybe its not actuating.?
|
All times are GMT -5. The time now is 05:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands