- - california powerstroke
(https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/76005-california-powerstroke.html)
emptywallet88
06-02-2011 11:27 PM
Hey guys sorry its been a while I checked the harness it was good found a reman idm on ebay from auto computer exchange for 140 and just went ahead and boutb the reccomended grp 110 from autozone 63 bucks did the simple install firedher up and the check engijne light was gone no problems so far if anything should so happen ill let u guys know thanks for the help really appreciate it. Saved myself 1100 dollars.
Mean Lx
06-04-2011 10:54 AM
Originally Posted by emptywallet88
(Post 760139)
Hey guys sorry its been a while I checked the harness it was good found a reman idm on ebay from auto computer exchange for 140 and just went ahead and boutb the reccomended grp 110 from autozone 63 bucks did the simple install firedher up and the check engijne light was gone no problems so far if anything should so happen ill let u guys know thanks for the help really appreciate it. Saved myself 1100 dollars.
I took mine to the Ford Dealership for them to diagnose as my OBDII was not showing any codes. So, for 100 dollars they told me the IDM was bad in my 99 F350. I like you, ordered a remanufactured part for much less than Ford wanted and replaced it myself. However, I had bought a new fuel filter and cover from Ford (had a NAPA or aftermarket fuel filter) and the technicians used a screw driver to get it off after I had told them it had recently been changed and it wasn't the problem! Scarred up my new fuel filter cover; pissed me off!
