fass fuel system
 

does anyone know if you can get diffrent harnesses for a fass 150 to make it plug and play for all manufacturers because i found a great deal on a system buyt it was off a 98-02 cummins but going on to a 00' powerstroke so i need to see if the pigtails are interchangeable or will i have to send it to fass to get it changed?

Pig tails are the same on every pump... Contact fass and just order the correct harness.

It is not the correct pump for your truck. It is a low pressure lift pump for a cummins which puts out about 13-15psi. Your PSI requires 55-70psi.

Dont get it, waste.

oh shit i never even thought about that thanks but is there a way to bump the pressure on the fass pumps i dont know anything about these b/c i know on some air digs the pressures are adjustable

its adjustable but we're talking two totally different pressure ranges here. no way no how

Not that big of deal, just get the correct FP spring when getting the harness... But I also agree this better be a smoking deal or else Id just get new and not have to worry abt any issues

As for the pressure being to much for the pump to make? BS... My Airdogs have come factory preset to 20psi and the one on my 12v will push 70psi no problem... Turned it back to 60 at idle and 55 at wot.

Attachment 44091

Your right... I was thinking air dog not Fass...

There are two different type of Air Dogs and the Dodge one is not "meant" to run those kind of pressures.

They sent me a ford spring for mine to use, stiff lil sob :D But I took it out when I got my adjustable over flow valve...

I think you can even change the springs in the air dog as well, but the housings and the harnesses are universal