01 F250 Brakes
Just a quick question regarding changing rotors on my 01 F250 PSD. The question is how hard is the removal of the factory rotors (front & rear) to swap them out for Powerslots? Is anything pressed? Or will the rotors just basically pull off once the caliper is removed?
Thanks in advance. Bill |
Pull the calipers off with their mounts and the rotors should slide right off.
|
What RF said. I had no problems removing mine when I replaced the rotors and pads
|
The only hard part is breaking the torque on the caliper mounting bracket bolts.
|
Sometimes the rotors will be hard to get off, you just need to bump it out with a big hammer. Once you brake it lose, it will slide right out.
|
All times are GMT -5. The time now is 06:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands