Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 99-03 7.3L (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/)
-   -   oil rail plugs locations (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/50917-oil-rail-plugs-locations.html)

stephenjr 05-17-2010 11:52 AM

oil rail plugs locations
 
I think i figured out y my truck has a slight rough idol. When i put the adreniline hpop in i musta drained the oil rail lines to the injectors. I went on desialsite.com and they said pull the icp sensor and check for air and it looked good no air, so then they said unplug it and see how it idols and i did and it was deff. better smoothhhhh. But they said also check the passenger side oil rail for bubbles. Wheres the plug on the passanger head side? i know their is one in the way back but thats the low side. i need one on the high side. Or should i just replace the sensor could it be bad?

Kyle_KleinSS 05-17-2010 01:43 PM

Im pretty sure when you change injectors you have to let it run or drive it real easy for like 50 miles or let it sit and idle in your driveway for a few hours. This will work the bubbles out of the hpo system when you change injectors so Im sure it will be the same with hpops. When I did my hpop I didnt have a problem cause mine sat for a week before I could start it cause my brother broke the fpr fitting off the fuel bowl so I had to wait almost a week. He broke it on a thursday night on a holiday weekend so the dealer wasnt open until tuesday

stephenjr 05-17-2010 04:45 PM

well i did change the injectors to.

CSIPSD 05-18-2010 06:05 PM

You need to run the piss out of it... You just need to run it to get the air out...

With anything that opens the HPO system, it will take 50-75-100 miles of driving before its just right.


All times are GMT -5. The time now is 09:59 AM.


© 2024 MH Sub I, LLC dba Internet Brands