94 7.3 trans in a 99 f350
 

Hey i have a 99 f350 7.3 4x4 auto and i want to do a manual swap. I found a trans and transfer case out of a 94 7.3 will everything bolt right up and if not what needs to be done( besides the normal swap stuff peddles, clutch master, slave, etc.) im talking will the flywheel, clutch and trans all bolt up and will there be any clearance issues?

thanks in advance for the help!

I would try to find a ZF6, I think the swap would be a little easier

only reason im considering this is because its dirt cheap or i would do the zf6

You will need flywheel and clutch, Tcase, redo the drive lines, the peddles and cylinders, probably custom make a mounting plate, not sure what else