PowerStruck: I am on it, ill try to follow it, but again no one around here seems to be able to do the reading correctly ala the language of powerstroke

Bestrada11: that is a very gracious offer, the 'chip' thing is above my pay grade but I am trying to see what the super chip can read. Ill try to get a UPS acct # ASAP

I am near Erie Pa right now. Spent 30 yrs in Baltimore and due to an admitted addiction problem, have the crab jts number above my desk.

Don't like Seafood .... name your poison. We get as few as 55 days of sun here and Casper has used up 3 this wk / it is getting personal

Yea man for sure I can also look at the model number so u can clear up what it might read. All I know is it will pull codes

really need auto enginuity or some sort of tester that can do on demand tests along with pid datalogging

Bestrada11

Superchips says it will read codes / as well as other readers / I dont know
I would like to try
I have a UPS account / please contact me at mbarnes.cm@gmail.com or
814 789 3024 hm
410 409 9177 cell

thnx

bestrada11

How do I contact you?

thnx

barnes @ mrjunks

THNX to the heroics of bestrada11 I got a reading today of:

PO340 � CMP Camshaft position sensor ckt. malfunction ----- Open/grounded circuit, sensor fault, short to power

(CMP changes 4 x, wire replaced in harness / I am getting RPM (160) to reader and gauge inside)

P0603 � PCED Internal control module KAM error ---- Open PCM pin, disconnected B+, faulty PCM

P0472 b EBP Exhaust back pressure sensor circuit low input ----- Open/grounded circuit, biased sensor, PCM

P1210 b ICP ICP above expected level ---- ICP sensor, open signal return

Any ideas on where to start

thnx

prolly a 3 wire sensor shorted to Vref

'a 3 wire sensor shorted to ' (Vref)

come again

a three wire shorted to ground??

thnx

---AutoMerged DoublePost---

Can anybody define what was meant by Vref
was that a Typo?
Or something I should be moving on?

thnx

I take it Vref might be voltage reference

Does anybody know what that might indicate / a short in a plug? A short in the wire harness, ??

Thnx

Have the same problem and throwing a p1316 and p1670 codes

---AutoMerged DoublePost---

Any answers?