ok im not doing a buzz test the passenger side is all fine but for some reason the #6 and #8 injector isnt getting a signal i can swap the injectors around all day long and the injectors are all good but not firing at the #6 and #8 even with a new valve cover gasket i ges the only thing to do at this point would be to check wires going to the fuel control module?

 

the wire plugs to where the wires go into the valve covers have a tendency to go bad on those, check where the wires connect at the vavle cover, i bet you have a bad plug. can get new wiring loom for under valve cover pretty cheap, usually around $50

 

i have a new pig tail that hooks into tyhe valve cover gasket i guess i could solder on and see what happens