Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 94-98 7.3L (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/)
-   -   140hp chip and no smoke ? (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/94190-140hp-chip-no-smoke.html)

ugdude77 04-08-2012 11:36 PM

140hp chip and no smoke ?
 
i have a 1996 f250 auto and ordered a ts 6 pos chip cold air intake and boos presure relief valve and cant figure out why even on the 140 setting my truck dosent black smoke. now im not wanting to blanket a 6 lane highway but a little trail getting on it would be enjoyable. Does anyone think there is an issue with my truck or what cause other people on youtube who have the same chip and truck will roll coal liek its nothing.

nasty 2005 04-08-2012 11:43 PM

Your stock truck can't supply enough extra fuel to allow it to smoke! Every truck is different but some powerestrokes are just that way, just enjoy the clean power!!!

ugdude77 04-08-2012 11:53 PM

thx and yea thats what i was thinking but injectors arnt cheap. but i only ordered the chip and all because i found an awesome deal.chip,cai,and boost valve for $400 shipped. Do you know of a good cheap injector set cause i priced some stage 2's and it was 4k minus 1200 for core charge

1999stroker 04-09-2012 01:38 AM

Do you have gauges to monitor all your vitals? If not I would run that chip in your lowest setting or you can cause damage.


Strokin' Away

95powersmoker 04-09-2012 08:56 AM


Originally Posted by ugdude77 (Post 880632)
thx and yea thats what i was thinking but injectors arnt cheap. but i only ordered the chip and all because i found an awesome deal.chip,cai,and boost valve for $400 shipped. Do you know of a good cheap injector set cause i priced some stage 2's and it was 4k minus 1200 for core charge

You can have your's rebuilt for much cheaper. Rosewood is a site sponsor, Check with him. If you decide on stage 2's though, you will need gauges, HPOP, fuel mods, trans mods...etc... It isn't cheap to build these trucks. And please please please, build for power, not smoke.

ugdude77 04-09-2012 09:36 AM

yea, i normally only run on 50 maybe 75 setting but i'm trying to decide on what type of gauges and whether to do it on the pillar or go old school and mount it on the bottom of the dash. and 95powersmoker im not building for smoke im building for power but a little smoke would be a good by product when i wanted a little right now even getiing on it from a dead stop it puffs.

---AutoMerged DoublePost---

how would i get hold of rosewood if their stage 1's are only 500 for the set

95powersmoker 04-09-2012 09:43 PM

Email them, call them or check out their website... Keep in mind that 500 is for building your injectors and assuming that all the parts in the injectors currently are good and don't need to be replaced. If you look, you will pay more for all new parts and a longer warranty.

As far as gauges... I run autometers, not issues in the two years... Isspro is good quality stuff but you pay a little more. Mounting is up to you...

Smoke is overrated but I'm not gonna try to change the world one forum poster at a time...

powerstroke cowboy 04-09-2012 10:02 PM

With stock injectors, you can not, and will not EVER see more then 70-75 extra HP at the Wheels.. AND with a TS chip you might not even see more then 50 extra at the wheels..

Get stage ones or two injectors, THEN get you chip custam burnt.

ugdude77 04-09-2012 11:30 PM

thx 95 and right now im looking at glowshift guages with pillar pod and its 195 free shipping and dont get me wrong im not trying to blow smoke but just a little puff on take off would be nice for all the money,time,and sweat in this dang thing but you gotta pay to play i guess

Diesel Dawgs Performance 04-09-2012 11:49 PM

Glowshifts are Junk

Luke


All times are GMT -5. The time now is 12:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands