Intercooler?
I have a 97 f350 and ive been looking into getting an intercooler but they are so damn expensive. Would i be able to pull an IC from a newer model truck from a junkyard or something? if so what year would work best?
|
superduty 7.3 or the 6.0 is bigger.
|
will the 6.0 cooler fit?
|
It fits as well as the 7.3.
|
so would i be better off getting the 7.3 or the 6.0?
|
well it's up to you. the 7.3 has aluminum end caps, and the 6.0 has plastic. (some say that the made a 6.0 IC with aluminum end caps. i don't think this is true.) you will need a spyder pipe from a early 99 superduty.
|
Originally Posted by fordornothing
(Post 862433)
well it's up to you. the 7.3 has aluminum end caps, and the 6.0 has plastic. (some say that the made a 6.0 IC with aluminum end caps. i don't think this is true.) you will need a spyder pipe from a early 99 superduty.
|
Most all 7.3 intercoolers had plastic ends. E99 were the only ones with metal ends I think. I'm running a plastic ended IC from an 01 and it works great. As far as I know all 6.0 IC had plastic ends but I wouldn't worry about that unless you plan on pushing 50+ psi
|
Originally Posted by joebob3093
(Post 862478)
Most all 7.3 intercoolers had plastic ends. E99 were the only ones with metal ends I think. I'm running a plastic ended IC from an 01 and it works great. As far as I know all 6.0 IC had plastic ends but I wouldn't worry about that unless you plan on pushing 50+ psi
|
Thought it was mostly the early SD but guess not.
|
All times are GMT -5. The time now is 01:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands