full force stage 3 238cc injector questions
on my 97 would my hpop be ok to run these? how do i tell if my hpop is a 15* or a 17* ? besides a tuned chip would i need any other upgrades? i already have 4 inch straight pipe,edge chip(ditching tht came with truck),and 160xxx miles
|
You have a 15* unless someone changed it... You really will want at least a 17* HPOP to run those efficiently...
You will want e-fuel, intercooler, turbo, studs, pushrods, springs, HPOP, and some custom tunes. |
You could run them fine, just on your higher HP tunes your HP will drop off as the ICP pressures drop.
Make sure you have Gauges, Pyro, Boost, Tranny and if you can a Fuel pressure gauge. But James is right, a 17* pump would be better. |
Ive heard of modded 17° pumps for like 300 bux with a core charge would that be a btter way to go seems really cheap but I forgot the website I think it was tm performance or something
|
Originally Posted by powerstroke312
(Post 756971)
Ive heard of modded 17° pumps for like 300 bux with a core charge would that be a btter way to go seems really cheap but I forgot the website I think it was tm performance or something
|
Originally Posted by powerstroke312
(Post 756971)
Ive heard of modded 17° pumps for like 300 bux with a core charge would that be a btter way to go seems really cheap but I forgot the website I think it was tm performance or something
I would skip the "modded" pump and go with a SRP-1 or an Adrenaline, something that has been shown to improve HPO pressures. But a stock 17* pump will run some stock hybrids without issue. |
So a stock 17° pump will run those injectors and be ok with stock turbo
|
You will push the stock turbo. Keep it under about 30-32# boost and you will be fine.
|
Stock turbo is going to hate you... I don't see it lasting long... Depends on how you drive.
|
All times are GMT -5. The time now is 11:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands