New Injectors
 

I am looking at a new set of injectors to have built.
Have anyone used AB code injectors?
Or what should I be looking for in a performance injector?
I want enough fuel for the upper 500 or lower 600 hp range.

i personally like hybrids. i know a guy who put 238/100 hybrids in his 2000 7.3 and 2 weeks ago he had 596RWHP on a dyno. he told me they have enough juice to turn the twins hes getting ready to put on and if you think about it, its 238 CC of fuel, thats a lot.

You are going to want some big hybrids... 250/200 is the injector I want when I jump into a SD... Depending on the turbo, those will put you in your range.

AB's are just 120cc split shots... Nothing special. I ran some in my truck for about a month.

i would go with some where around a 250/200 or 300/200, that should put you pretty dang close to 600

OK,
Give this old guy some education.
Whey you say hybrids, what exactly do you mean?
What makes a injector a hybrid?

https://www.dieselbombers.com/ford-p...ease-read.html

Read this sticky... It will help.

Also, dont I know you from other forums? If your sponsered by EIS, then you should know what hybrids are...

he is the one who built the bad twin turbo setup on his black OBS

Thanks for this, This helps me a lot. Yes EIS does build my injectors, Not real sure what he does but it does work. The sticky realy helps me understand what the different injectors are.

I had EIS injectors... I had to send them elsewhere to get fixed.:argh:

I hope he has gotten better over the years.:ouch: