hydraulic pump mount
#1
hydraulic pump mount
hey guys i just got done swapping out a 460 for a 7.3l powerstroke in my tow truck. its a 1997 f450 with a 7.3 diesel. the only thing i have yet to figure out is to mount the hydraulic pump. its belt driven on the engine. anyone have any ideas on how to mount it? it used a pulley that takes 2 normal belts (non serpentine) but the truck is a serpentine setup. anyone ever mount hydraulic pumps on one? pictures are helpful. thanks
#2
what about geting a pump to sit where the a/c pump goes? i know they are out there i just don't know who makes them. The Original Flatbed Bale Handler last i checked. for the "hydra bed" they use a belt driven hydraulic pump.
#3
i can put it where the ac goes but i still need the ac its way too hot here living in a truck without ac all day. and i have a place to mount the pump.but all the clutch pto pumps use a dual v groove 1/2" belt pulley. the truck is a serpentine. so i need to find a combination pulley that can still run a serpentine on the crank or another pulley but have v grooves in front of the serp belt
#5
#6
#7
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
B.k. Smith
12 Valve 2nd Gen Dodge Cummins 94-98
10
01-07-2015 02:29 PM