Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 94-98 7.3L (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/)
-   -   Water Methanol or Propane injection (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/55601-water-methanol-propane-injection.html)

BigOX 07-31-2010 03:21 PM

Water Methanol or Propane injection
 
I have been looking into water methanol and propane injection and i dont quite get it. My questions are, Which one is better in the long run? And Where does it inject the mixture? Any input would be great i am still doin some research and tryin to find out on my end. Thanks fellas

fordornothing 08-03-2010 09:13 PM

i would say water/ meth. because with propane it's more for extra power but could turn up you EGT's. with water meth you will get more power. it will actually drop your EGT's. with water/meth it is injected directly into the air strem via intake y pipe. (after the turbo and intercooler.) with propane i'm not exactly sure where it goes in at. the nice thing about water/ meth. it will actually clean your combution chamber. for more information, go to Snow Performance: Home

CSIPSD 08-04-2010 01:17 PM

Check out cooling mist...

Water Injection, Methanol Injection, Alcohol Injection Systems | Coolingmist

I prefer water injection over propane, no timing changes with just water injection.:tu:

cummins96 08-04-2010 05:33 PM

i would also say water/meth bc u will get more power depending on the mix, but it will also lower egts and clean your engine:tu:https://www.dieselbombers.com/images/smilies/tu.gif

BigOX 08-05-2010 12:16 AM

Thanks Folks i really apprecaite it. Looks like I'm goin with water/meth.:jump:

---AutoMerged DoublePost---

so if the resovoir runs low, what happens? I would guess it would be fine, right? it would just run as if i haden't installed it?

fordornothing 08-06-2010 04:50 PM

i would recomend a large resovoir, snow performance has a 7 gallon. that way you don't have to check it all the time.

BigOX 08-07-2010 01:27 PM

Where do you mount the resovoir? i would think the engine compartment right? is that where everyone else puts theirs?

fordornothing 08-07-2010 02:59 PM

if you go with the smaller one. you might be able to. i'm not sure where you would though... if you get a bigger one. it would have to go in the bed.

BigOX 08-07-2010 03:43 PM

Right on. But should i go with Snow Performance or AEM?
Both have the 150 psi injection pump. and on ebay snow performance is 300 w/ 3quart resovoir, and AEM is 360 w/ 1 gal and 395 w/ 5 gal tank

fordornothing 08-07-2010 08:26 PM

i would say snow. last year at truck fest i was talking to them. the staff is very knowledgeable and can help you with any question you might have. i haven't even heard of AEM. and snow has 3 different stages to best suit your needs.


All times are GMT -5. The time now is 01:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands