sounds like a slight miss but I don't know...
 

My 94.5' powerstroke sounds like it has a little miss. At idle it shakes a little more than it should and I can hear a little bit of a different noise from one cylinder. When it is under load it will shake quite a bit at lower rpms. It only has a ts6 chip but it still feels as it has just as much power as any other 7.3 I've been in... I need help!

have you scanned it or done a buzz and contribution test on it?

No I haven't. Is there any way to do any of those tests without a scanner?

not really, need to get a scanner on it

May I ask what a buzz and contribution test are? I've never heard of either one and am really curious. Thanks.

Rande

buzz test makes sure the injector solenoids are firing right and the contribution test makes sure all the injectors are working like they should be.

Ok, Thanks for the reply. I just bought a 94 f-250 idi and it seems to be in good mechanical running condition. I'm going to go thru the truck to make sure everything is in good shape before I start depending on it so I was really curious. Thanks.

Rande

those tests are for a powerstroke, the IDI is a totally 100% different engine

LOL well naturally. This has not been my best year. Thank you for not letting me embarrass myself by going to a shop asking for those test's. Have a great day and Merry Christmas.

Rande

94 1/2 Powerstroke
 

My PS when it starts sometimes or tries to start seems like it isn't running on all cylinders. When it does this I turn it off and restart and it does fine. Seems to idle a little ruff also. Any ideas? Thanks Dave