95 powerstroke running on 6 injectors?!
 

Ok so I bought a 95 powerstroke recently and have been troubleshooting. I replaced cps, checked fuel pressure, changed oil, replaced fuel filter, tested vc gasket for ohms, tested from injector to idm for same ohm reading. It was all good. My number 1 and 3 injectors are not working because I can unplug the harness to them and It runs no different. After getting all tests as good I figured it must be the idm so went and got a rebuilt idm and its still doing the same thing. any help is appreciated.

:humm: Some of the best Fords out there run on 6 injectors :w2:

uhuh

95 powerstroke running on 6 injectors?!
 

Did you have oil spitting out of the injectors that you thought weren't running?

When you tested the valve covers did you separate and verify that it's not burned up?

Only other option is to get 2 remans if you just need it to run otherwise I would recommend a set of AC codes. That would really give it a good kick.


Sent from my iPhone using Tapatalk 2

Didn't see any oil on 1&3.