Compression test!
So I did a compression test, procedures are followed. I removed the valve covers, UVCH, and of course unplugged all of the injectors. I cranked the engine over until I saw that the psi's had peaked. Let me know if I did this wrong!
Cyl 1 - 420 psi Cyl 2 - 390 psi Cyl 3 - 420 psi Cyl 4 - 410 psi Cyl 5 - 400 psi Cyl 6 - 395 psi Cyl 7 - 400 psi Cyl 8 - 350 psi Let me know how these numbers stack up. Also if I did this correct or not. Thank ya!! ---AutoMerged DoublePost--- Bump?? |
I remember seeing 375 as good and your average was 398. With about a %5 avg sound like a good running engine.
|
I wasn't sure if a 70 pound difference was too much.
|
that's a 70 pound difference, which, from your highest, is 1/16th, which is about 16.8%.
general rule is that your lowest compression figure should be 75% of your highest. and yours is about 84% if my math stacks up. should be fine. |
All times are GMT -5. The time now is 08:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands