Safe horsepower
How much horsepower will a 6.0 handle until you starts breaking stuff. I have arp heads studs new head gaskets.
|
auto tranny or manual
|
After you get injectors,turbo,airdog you will have to worry about your trans
|
It is a auto tranny
|
You can call a tuner and get it de-tuned probably, that would help :c:.
Seriously though... we need more info about the headgasket job and any mods you have now. What are you looking to do with the truck, how much money do you have to spend and what power do you want the truck to make? ~700hp is where you're going to need the bottom end built, but that's past a daily driver anyways so if you need to DD this thing no need to worry about that power. When you say "break stuff" what kind of stuff have you had in mind? The top end valvetrain and stock cam have been spun up near 1200 rwhp without issue. Rods need upgrading around the 650-700 hp mark. Trans will need a build up nearing 550rwhp and more. The weakpoints are always the headgaskets on these, so more info on the build there would help, like who did it, how it was done, what gaskets used, etc... Then of course there is the ever common oil cooler and EGR cooler issues, if those haven't been addressed yet. |
The head gaskets are ford oem head gaskets it was all done by ford dealer I am getting ready to delete egr cooler have the delete kit just waiting on some free time. I am wanting around 500 550 horsepower. Not planning on doing it any time soon but definitely would like to in the future. And what I am saying about breaking is what do I need to upgrade so the truck will handle 550 horsepower. The mods are just straight pipe sct tuner with stock tunes.
|
stock trans can handle around 500hp but getting a built one will be good even if you dont buidl it for awhile. Other than that make sure your FICM is good, get a FICM tune, custom tunes, airdog 2, whatever injectors you want(depends on how much you tow), and a powermax or bigger turbo to go with it. 6.0s will hand 500-550 all day with good Hg's and ARP's, good oil cooler, properly functioning egr cooler or egr delete.
|
ok thank you for the info my ficm is only 8 months old would i still need a ficm tune
|
Originally Posted by powerstroke7
(Post 883675)
ok thank you for the info my ficm is only 8 months old would i still need a ficm tune
:tu: |
Hopefully when you had the dealer install the head studs, they sent the heads to a machine shop to be checked out for flatness, cracks, and pressure tested.
Even with head studs, if the heads are warped, the gaskets will fail. |
All times are GMT -5. The time now is 06:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands