Just changed coolant not staying full
I just flushed my coolant and had not problems in the past with it dropping below the minimum and now it will not stay above the minimum. I put 4 gallons of caterpillar coolant in it and it was fine at first then it started dropping. Does it need more than four gallons after I flushed it. I'm pretty sure its not my head gaskets just had them done last Feb. along with arp head studs, egr, and oil cooler.
|
leaking petcock?
|
How fast is it dropping??
|
It is supposed to be below the "min" line in the plastic. min is the new max. Aprox. 3/4 inch below "min" line is the new min line. Some of the degass bottles have a updated sticker on them. pt
|
about a week is how long it takes to drop
|
Check the petcock, or it may even be a leaking water pump or a hose. :humm:
|
I am not to sure on where the petcock is located can someone lead me in the right directioon.
|
Not sure exactly where the petcock is at. But they are usually on the bottom of the radiator on the opposite side of the lower coolant hose.
|
Is your truck lifted or leveled?
|
Who did the headgaskets and how were they done? They could easily be bad again. I highly doubt the petcock started leaking out of no where.
|
All times are GMT -5. The time now is 02:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands