Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Best Cold Air Intake And Exhaust Setup For An 04 Ford F250

Thread Tools
 
Search this Thread
 
  #1  
Old 05-27-2008, 07:52 PM
dieselgrl4life's Avatar
Cowgirl with a Cummins
Thread Starter
Join Date: Jan 2008
Location: Rio Oso ca
Posts: 284
Received 18 Likes on 17 Posts
Default Best Cold Air Intake And Exhaust Setup For An 04 Ford F250

I have a friend who is in need of an exhaust system and a cold air intake system for his ford, being a cummins girl I am not well versed in what products work well on the powerstrokes? any one have any suggestions? thank you guys!
 
  #2  
Old 05-27-2008, 11:59 PM
Blue01F250's Avatar
Duramax Virgin
Join Date: Dec 2007
Location: Ponca City, OK
Posts: 2,221
Received 99 Likes on 92 Posts
Default

Well, on exhaust - basically any 4" turbo back system will do wonders for your friend -- they can also make due with a 3.5" down pipe and the rest 4" if they would rather.. just basically preference and the 4" will help with keeping EGT's slightly lower.. MBRP, Silverline, etc. all make good 4" exhausts... then you get to choose with or w/o cat, muffler, tip, stainless or alumanized, duals, etc.

As for the intake, the stock intake is just fine until your friend gets well into the 500-600 + HP range -- if they really want to spend the $$$ though, and AFE Stage 2 with the proguard 7 filter is one of the best, but if I had a 6.0, I'd save my $$$ on an intake and spend it on a tuner, studs, or other worthwhile mods
 
  #3  
Old 05-28-2008, 12:02 AM
2500HeavyDuty's Avatar
Super Moderator
Join Date: Oct 2007
Location: Houston, Tx
Posts: 14,872
Received 764 Likes on 627 Posts
Default

just tell him to cut his muffler off for his exhaust, they sound so sweet straight piped
 
  #4  
Old 05-28-2008, 12:26 AM
Blue01F250's Avatar
Duramax Virgin
Join Date: Dec 2007
Location: Ponca City, OK
Posts: 2,221
Received 99 Likes on 92 Posts
Default

thats for dang sure -- made me wanna trade in my 7.3 once I drove Joe's after I got him his straight exhaust... but the larger exhaust will help with EGT's -- which will likely be something he/she will need to worry bout in the near future... it only takes one mod to start the ball rolling!
 
  #5  
Old 05-28-2008, 12:32 AM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

I gained 1 mpg when I installed my intake on both my 04 and 05 6.0 Powerstrokes.
 
  #6  
Old 05-29-2008, 11:51 PM
BLACK_06POWERSTROKE's Avatar
Diesel Enthusiast
Join Date: May 2008
Location: princeton, indiana-
Posts: 472
Received 23 Likes on 23 Posts
Default

afe stage 2 or dry would be your best bet on a 6.0 intake like blue01 said any 4"turbo back will make big diference on that truck. JUST PLEASE STAY AWAY FROM BANKS!! dont make the same mistake i did there intercooler is unbeatable but other than that stay away from them. and if he decides to get a tuner and go crazy with it should make an appointment to get the heads studded. the factory headbolts are schit!!
 
The following users liked this post:
dieselgrl4life (05-30-2008)
  #7  
Old 05-30-2008, 12:56 AM
dieselgrl4life's Avatar
Cowgirl with a Cummins
Thread Starter
Join Date: Jan 2008
Location: Rio Oso ca
Posts: 284
Received 18 Likes on 17 Posts
Default

Originally Posted by BLACK_06POWERSTROKE
afe stage 2 or dry would be your best bet on a 6.0 intake like blue01 said any 4"turbo back will make big diference on that truck. JUST PLEASE STAY AWAY FROM BANKS!! dont make the same mistake i did there intercooler is unbeatable but other than that stay away from them. and if he decides to get a tuner and go crazy with it should make an appointment to get the heads studded. the factory headbolts are schit!!

he mentioned gettin some tuner id never heard of that is supposedly able to put 400+/700+ to the ground!!!! that is unheard of!! i cant remember the name of it but i told hinm the same as u just told me, the other day. i crwled under the truck the other daty to cuz he said it was gunna be a b**ch to get the exhaust off and replaced. i told him i wanted too see it so i was looking at it, iwas holding the pipe right by the first bend after the down pipe and it moved! it had at least 2" of play back and forth, also his trann was covered in black oil and grease that had no smell to it. no leaks on the concrete but it was absolutely covered. u could literally see where it was coming out of where the tranny seald together! i was all umm u might wanna take this thing in and have them check ur tranny . hes all i didnt even notice that. the entire motor was covered in grease he told me the ford tech said that was normal? my engine is clean, and i dnt clean it . so yeah thats my schpeel.
 
  #8  
Old 05-30-2008, 10:57 AM
BLACK_06POWERSTROKE's Avatar
Diesel Enthusiast
Join Date: May 2008
Location: princeton, indiana-
Posts: 472
Received 23 Likes on 23 Posts
Default

ya i think your friend definitly needs to get that looked at. as for the downpipe if/when he gets the new exhaust dont even bother trying to get it out in one piece, get the sawzall out and chop that thing in half as high up as yuo can reach it will save you a lot of time and headaches. as for the 400/700 chip i have never heard of that kinda numbers id like to know what it was. i know ive talked to a lot of guys on powerstroke.org and they all recomend SCT for the 6.0. just keep remindin him about HEAD STUDS hes gonna need them especially if he hits the numbers you mentioned

---AutoMerged DoublePost---

one more thing if the tech at ford said your friends situation was normal id be finding someone else to work on my truck just my 2 cents worth
 

Last edited by BLACK_06POWERSTROKE; 05-30-2008 at 10:57 AM. Reason: Automerged Doublepost
  #9  
Old 05-30-2008, 01:46 PM
dieselgrl4life's Avatar
Cowgirl with a Cummins
Thread Starter
Join Date: Jan 2008
Location: Rio Oso ca
Posts: 284
Received 18 Likes on 17 Posts
Default

thats exactly what i told him too do he was all yeah um that could work . i also said that about the ford tech. dnt wory i will but hes kinda subborn bout takin advice from a girl, yet he asked me to come look at the truck i dont get it. whatever i told him eazctly what you have told me and more . so well see what he chooses.
 
  #10  
Old 05-30-2008, 05:08 PM
BLACK_06POWERSTROKE's Avatar
Diesel Enthusiast
Join Date: May 2008
Location: princeton, indiana-
Posts: 472
Received 23 Likes on 23 Posts
Default

hahaha you can lead a horse to water you just cant make it drink . haha i thats weird he wants you to look at the truck but wont take your advice ill agree. hell i wish my girl friend would help me work on my truck that would be DIFFERENT. the one i have now will help me clean it up but when its time to turn wrenches she is no where to be found
 


Quick Reply: Best Cold Air Intake And Exhaust Setup For An 04 Ford F250



All times are GMT -5. The time now is 05:14 AM.