Getting P0273, P0282 & P0275 codes after EGR delete
 

A few weeks ago I started getting the white smoke from the exhaust. After confirming the failed EGR cooler it sat for a few weeks while I gathered parts and time off.

Fast forward to today. The EGR has been deleted and during the coolant flush cycle (I'm planning on replacing the oil cooler once I finish this Restore & Restore Plus flush) I took it on the highway to get the engine up to temp.

Even while leaving the driveway it seemed to have a bit of hesitation (which at the time I attributed it to air in the fuel system since I also upgraded to the blue spring) which didn't go away once it was on the highway.

I loaded up Torque and it is now listing P0273 & P0282. I think I've got the troubleshooting doc to test the resistance of the injectors and to test the FICM. Yet FICM voltage was showing between 48-49.5.

Anything else I could look at or try? I have reseated the #5 & #8 connectors also.

---AutoMerged DoublePost---

Quick vid