Gauges
 

The only gauges I have currently in truck are stock gauges in dash. Of course you guys know these things don't give any readings other than high or low. My question is can I put isspro gauges in the dash to replace stock gauges? I am doing some upgrades over the next couple of months and plan on putting me a piller mount gauge pod in with a pyrometers gauge, hoop gauge and fuel pressure gauge. That will pretty much fill up the piller mount and don't really want a bunch of gauges all over dash or under dash but would like more than just a high/low reading. Know what I mean

really can't replace the guages in the dash, they are not like the older cars that had actual guages built into the dash, these guages are basically a circuit board with micro motors for the needles. They make nice 3 and 4 pod pillar mounts and also some nice overhead mounts.

That's what I figured:argh::argh: so will I be able to disconnect gauges in dash or just have to live with them and install what I want?

just leave the stockers alone, then add what you want.

Thanks for the info. Kinda figured that's what was going to have to happen but it never hurts to ask questions

Why not get a touch screen edge cts moniter it will moniter everything on a 6.0l

Going to put a sct tuner in. Have not really thought about putting a monitor in. Not sure but I think the sct will monitor everything also:humm:. Not sure cause I have looked at so many things over the past two days. Going to do something cause I don't want to ghetto up my baby

---AutoMerged DoublePost---

Going to put a sct tuner in. Have not really thought about putting a monitor in. Not sure but I think the sct will monitor everything also:humm:. Not sure cause I have looked at so many things over the past two days. Going to do something cause I don't want to ghetto up my baby

The sct isn't. Moniter unless you get the livewire and polls around here are to go with the sct hand held with a edge cts moniter

So i should get like a sct flash programmer and a edge monitor?

Yep and some custom tunes I went with gear head performance and have referred a bunch of people to matt there and every person I have referred said it was worth every penny I love my setup it will smoke my ford Cummins I had any day of the week