Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 03-07 6.0L (https://www.dieselbombers.com/ford-powerstroke-03-07-6-0l/)
-   -   Rough idle and rough ride (https://www.dieselbombers.com/ford-powerstroke-03-07-6-0l/108242-rough-idle-rough-ride.html)

Diesel firefighter 01-24-2013 12:37 PM

Rough idle and rough ride
 
This issue started yesterday drove a 40 mile round trip an my truck started having a shaky rough ride thought it may have been my tires but when I jus let it idle in park it has a roughy idle gauges all read good what could b wrong. 05 F250

Mdub707 01-24-2013 01:29 PM

Where are you located? Is it really cold where you are? Could be a number of things, we need more info about the truck though... is it stock? Blowing smoke or anything?

Diesel firefighter 01-24-2013 02:06 PM

I live in Texas it's 72 outside the truck is stock except for an exhaust new oil cooler egr delete head gaskets arp studs all done last year

Mdub707 01-24-2013 02:11 PM

Could just be an injector failed. Have you tried getting any codes read? Could be as simple as the ICP sensor acting up too.

Diesel firefighter 01-24-2013 02:50 PM

Not yet gonna go by autozone tomorrow an have them read the codes

Mdub707 01-24-2013 03:08 PM

Ok let us know what you find with that, it will be a good starting point.

Diesel firefighter 01-26-2013 08:53 AM

Ok guys no codes an still runnin like crap

Mdub707 01-28-2013 10:02 AM

How rough is rough? I broke my flex plate recently and the entire truck was shaking in park. Though, I couldn't restart it once I shut it off.

Test your FICM first, easy to rule out and causes lots of headaches. Could be any number of things, but you probably need a better scanner to pick up the codes.

How far are you from these guys: Welcome to Power Stroke Enginuities

They're VERY well versed in powerstrokes and reasonably priced as well. If nothing, they can probably read your codes for you.

Diesel firefighter 01-28-2013 10:08 PM

It's not to rough in park but when I'm driving an take off from a dead stop it doesn't have the git up it had an it shakes while mashing in the pedal

---AutoMerged DoublePost---

How do u test the FICM

bobfbigman 01-28-2013 11:57 PM

there is a sticky at top of the 6.0 section on how to test FICM, I think it is going to be a dead injector but test the FICM first.


All times are GMT -5. The time now is 01:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands