nlmannen |
09-03-2012 10:56 PM |
2005 f250 powerstroke hard start runs rough after warm and dies
I have a 2005 ford f250 powerstroke 6.0 I bought it drove it 2 hrs home and it died as I was turning in the driveway. So I tried to start it back up but it wouldn't I let it sit for about an hour then it started but now if I drive it after it warms up it runs rough and has no power then it dies It seems to run fine unless I get on it. I I have replaced the stc fitting, stand pipes, dummy plugs,updated turbo oil return, egr delete, and the ipr valve. I tested the ficm and its was getting 27v then would jump up to 48v so I took it apart and resoldered it now its getting 47 to 48 volts but I still have the same problems. Is it possable that The ficm is still bad? I tested The batteries and alternator they are all good. I would really appreciate the help.
|