Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Excursion 99-05 7.3L and 6.0L (https://www.dieselbombers.com/ford-excursion-99-05-7-3l-6-0l/)
-   -   Uh oh... bent and twisted metal (https://www.dieselbombers.com/ford-excursion-99-05-7-3l-6-0l/80456-uh-oh-bent-twisted-metal.html)

CSIPSD 08-01-2011 05:14 PM

Again... Shackles are not the only thing wrong there... spring looks bent too.

kai0sta 08-01-2011 06:11 PM

I completely agree with you on that, especially after looking over the truck again. I'm going to go ahead with the shackles first, and once I have them off the truck I'll try to assess any further areas that need to be addressed.

Knowing my luck, the springs will need to be reworked or replaced, but between now and then I'll keep my fingers crossed the bent shackle is holding the spring in that funny position.

I'm willing to bet you know something I don't... :humm:

njneer1 08-06-2011 07:55 AM

Have you had that thing airborne ? I can see what looks like witness marks on frame rail where the shackle came up and touched it

kai0sta 08-06-2011 10:12 AM


Originally Posted by njneer1 (Post 783235)
Have you had that thing airborne ? I can see what looks like witness marks on frame rail where the shackle came up and touched it

You would be correct about the shackles smacking the frame rails. I've been known to be rough on my vehicles in the persuit of big grins. As for having it airborne?... I plead the 5th. :w2:

I purchased a new set of 2" lift shackles that are insanely beefy. I should have them on sometime next week and I'll take some pics of the new vs. the old.

njneer1 08-07-2011 09:15 AM

I can't imagine going taller than you are now... What are you going to do in the back ?....to level it back up ?

kai0sta 08-07-2011 10:08 AM


Originally Posted by njneer1 (Post 783579)
I can't imagine going taller than you are now... What are you going to do in the back ?....to level it back up ?


What's that saying about guys with lifted trucks? The bigger the truck, the smaller the ... wallet? I'm sure it goes something like that, right? :humm:

I'm just going to leave the back end where it's at and let the front ride up a little. I've always been a sucker for that look when done right. I'm pretty sure I've decided to let a local shop do this for me. I gave my last jack away when it started having leaking seals and weight holding issues plus I don't have enough wood to crib it up if I wanted. To go buy a new jack and a small stack of wood probably costs about the same as sitting at home with the A/C on and sipping some iced tea while someone else sweats and gets dirty. I must be getting old - I used to really love turning wrenches.

njneer1 08-07-2011 01:18 PM

I'm lifted.....just not that high.....
Iced tea huh ?.....WTF....where's the beer ?? :tttt::c:

bking 08-07-2011 02:42 PM

i agree the higher the better!!!!!!!!!!!!!! ive got a 2000 f350 7.3(535 hp) 40inch pitbulls,15plus inches of lift fox duel shocks fabtec ect... im wanting to go to 44 inch tires next summer which means..............MORE LIFT!!!!!!!! you do what you feel is right and lift that baby!!!! as for taking it to a shop.......... come on thats part of the rewards of driving your rig is knowing(or bragging)about doing it yourself! im 46 and disabled(lower back fused from my ribs all the way to my tail bone)and still do all the work i can. so if you can handal it then DO IT! by the way your truck looks great!

kai0sta 08-07-2011 03:09 PM


Originally Posted by njneer1 (Post 783686)
I'm lifted.....just not that high.....
Iced tea huh ?.....WTF....where's the beer ?? :tttt::c:


Hahaha... I'm getting rusted pipes. I promise I drink my fair share of the lords blessing when the buddies are over so don't go thinking I'm a wussy. :c:

---AutoMerged DoublePost---


Originally Posted by bking (Post 783718)
i agree the higher the better!!!!!!!!!!!!!! ive got a 2000 f350 7.3(535 hp) 40inch pitbulls,15plus inches of lift fox duel shocks fabtec ect... im wanting to go to 44 inch tires next summer which means..............MORE LIFT!!!!!!!! you do what you feel is right and lift that baby!!!! as for taking it to a shop.......... come on thats part of the rewards of driving your rig is knowing(or bragging)about doing it yourself! im 46 and disabled(lower back fused from my ribs all the way to my tail bone)and still do all the work i can. so if you can handal it then DO IT! by the way your truck looks great!


Sounds like you've got a beast! Where are the pictures at?? My father taught me to do things yourself to get them done right. I've lived by that rule for many many years. I agree with you on the satisfaction of doing the work on your own too. Promise you, I'm no pansy with the tools. I've rebuilt a 1964, 1965 and three 1966 bugs from the ground up. Out in my driveway I'm working on a 4th right now. I've swapped motors and transmissions into cars they never should have been in, and handfuls of motor pulls/rebuilds/swaps for freinds with busted trucks and cars. Lots of lowering, lifting and suspension work under the belt, turbo charged N/A cars etc. I still think I'll pass on this one job. :tu:

Huge kudos to you for overcomming your injuries and keeping greasy! Not many fellas like you left out there, that's for sure. You keep doing what you're doing buddy!

bking 08-08-2011 01:02 PM

I am tryn to figure out how to post pics i put one up i will try again. Once again nice truck!! I will try again to put up sum pics. Its been in two magizines has chip foose paint job(the guy i bought the truck from said he dropped over a hundred grand into it and thats why i bought it! Keep on wheeling amd dont let anyone convense you to do your truck any differnt than you want it cuz i think its bad ass!


All times are GMT -5. The time now is 03:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands