9 Attachment(s)
Frame is all welded together.
Attachment 34008 Attachment 34009 Attachment 34010 Attachment 34011 Attachment 34012 Attachment 34013 Attachment 34014 Attachment 34015 Attachment 34016 |
10 Attachment(s)
Welds all cleaned up and painted. Slide the axle out from under the box and put it under the Ex frame. Decided to use the springs from the truck so we have to move the front spring perches forward 8". Going to have the drive shaft shorten from the 12.
Attachment 33969 Attachment 33970 Attachment 33971 Attachment 33972 Attachment 33973 Attachment 33974 Attachment 33975 Attachment 33976 Attachment 33977 Attachment 33978 |
13 Attachment(s)
Spring perches moved forward and all tided up. Gas tank and Shield back in. Start messing with the Euro tank.
Attachment 33920 Attachment 33921 Attachment 33922 Attachment 33923 Attachment 33924 Attachment 33925 Attachment 33926 Attachment 33923 Attachment 33928 ---AutoMerged DoublePost--- Eura tank mounted, brake lines all cut a spliced. Tomorrow cut and shorten the wiring harness. Attachment 33929 Attachment 33930 Attachment 33931 Attachment 33932 |
14 Attachment(s)
Wiring shortened up, drive shaft shortened and put back on, DPF kind of in place.
Attachment 33865 Attachment 33866 Attachment 33867 Attachment 33868 Attachment 33869 Attachment 33870 Attachment 33871 Attachment 33872 ---AutoMerged DoublePost--- Got all the exhaust reconfigured and hung. All the wiring figured out. Last to do is plumb the fuel lines and drill one hole for the new shocks. Attachment 33873 Attachment 33874 Attachment 33875 Attachment 33876 Attachment 33877 Attachment 33878 |
15 Attachment(s)
Got the shocks installed, broke out the bottom of the tank for the sending unit out of the 12. Need to lengthen the sending unit hoses and rods. So the gauge reads right. Also started lengthening the fuel lines.
Attachment 33806 Attachment 33807 Attachment 33808 Attachment 33809 Attachment 33810 Attachment 33811 Attachment 33812 ---AutoMerged DoublePost--- Fuel sending unit lengthened and installed, fuel lines all ran and hocked up, took the hitch back off and sanded and painted it with industrial paint. Fuel tank has to come back down to put the hitch back on because you can't get your hands in the frame to position the nuts/keepers for the hitch bolts and you defiantly can't do it when the body's on. Monday straighten up the wires and fuel lines, take the tank back down put up the hitch, reinstall the tank and transfer the fuel from the 12 into the Ex, fire her up and driver off the frame rack and set the body on the frame. Attachment 33813 Attachment 33814 Attachment 33815 Attachment 33816 Attachment 33817 Attachment 33818 Attachment 33819 Attachment 33820 ---AutoMerged DoublePost--- |
7 Attachment(s)
Everything all tided up. Used the V10 pump to transfer the Diesel from the 12 tank to the ex tank, swapped the filler necks and tubes. Got the 12 Excursion running today. Tomorrow but on the body and do the parking brake.
Attachment 33771 Attachment 33772 Attachment 33773 Attachment 33774 Attachment 33775 Attachment 33776 Attachment 33777 |
10 Attachment(s)
Body back on, doors back on, body jigged in and weld in place, Tomorrow welder up.
Attachment 33734 Attachment 33735 Attachment 33736 Attachment 33737 Attachment 33738 Attachment 33739 Attachment 33740 Attachment 33741 Attachment 33742 Attachment 33743 |
13 Attachment(s)
Not much to say today. Welded the floor and inner and out rockers together.
Attachment 33667 Attachment 33668 Attachment 33669 Attachment 33670 ---AutoMerged DoublePost--- Made a little more room in the shop today, welded up the A pillars and ground down the welds. Tomorrow prime welds and caulk joints. Attachment 33671 Attachment 33672 Attachment 33673 Attachment 33674 Attachment 33675 Attachment 33676 Attachment 33677 Attachment 33678 Attachment 33679 |
14 Attachment(s)
Got everything epoxy painted. Next week to work on welding the frames together.
Attachment 33612 Attachment 33613 Attachment 33614 Attachment 33615 Attachment 33616 Attachment 33617 Attachment 33618 Attachment 33619 Attachment 33620 Attachment 33621 ---AutoMerged DoublePost--- Started wiring the inside. Got the taillights, reverse lights, third brake light and a heavy ground ran to the battery. Attachment 33622 Attachment 33623 Attachment 33624 Attachment 33625 |
8 Attachment(s)
Still working on wiring. Got most of the Ex wiring wired back into the 12. Just have rear wiper, 12v outlet on one side, power for the rear heater/ac fan. Mounted the extra fuse box for those items and all the add accessories. All the DVD players, back up lights, will be coming from the fuse box. It has a hot lead right from the battery 125 amps, and grounding lead to the body and spots to hook up grounds. It's mound underneath the dash right next to where the wiring harness leaves threw the fire wall.
Attachment 33574 Attachment 33575 Attachment 33576 Attachment 33577 Attachment 33578 Attachment 33579 ---AutoMerged DoublePost--- Took my extra fuse box back out so I could split the fuse in half. So I have 6 hot at all times and 6 with hot in the key on position. Had to do this with a relay. I also wired in some more stuff. Back of fuse panel opened up. Attachment 33580 Attachment 33581 |
All times are GMT -5. The time now is 11:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands